Using constraints on how you rotate the view around the point cloud is a great way to get just the view you need quickly and easily.
In Trimble RealWorks there are various options to do this.
The most common is setting a rotation point. By default, TRW will rotate around the position of the mouse cursor.
This setting can be changed under the View tab in the Navigation section. Alternatively, you can select to have the center of rotation manually defined by pressing the X key and then using the mouse to select the specific location you would like the view to rotate around. You can use the shortcut key Q to toggle between the two options.
Another unique feature is locking the view to Heads Up. This is turned on by default and helps to not get disoriented why navigating the point cloud. When this is active you will notice that you can’t rotate the Z or Elevation axis side to side, only toward you and away from you.
The option to turn this off is also found under the View tab under the Navigation section. As you can see when this is turned off you can end up with some strange views. It is easy to turn the Heads Up lock back on by simply pressing the shortcut U button.
However, there are some useful options available with the Heads Up lock is turned off. Moving the mouse cursor to the far left or right of the screen will allow you to rotate the project around a horizontal axis through the middle of the 3D display.
Moving the mouse cursor to the far top or bottom of the screen will allow you to rotate the project around a vertical axis through the middle of the 3D display.
Moving the mouse cursor to the corners of the screen will allow you to rotate the project in a circular motion around a point in the center of the 3D display.
These rotation options are even more effective when combined with the View toolbar and remember you can always use the U button to quickly return to the more familiar Heads Up locked view.
I think that you'll finding using the different rotation options in Trimble RealWorks can greatly improve your productivity and help you to get just the view you need.
To learn more about RealWorks click here
Download Trimble RealWorks
Thank you for your interest in Trimble RealWorks! You should receive an email soon with further instructions.
À propos de l’auteur
Jason Hayes is a Product Manager at Trimble Inc., where he is responsible for guiding the development of 3D laser scanning software and promoting Trimble laser scanning solutions.
Prior to joining the software team, Jason worked as the Product Manager for the Oil, Gas, and Chemical division to bring the Trimble CX and Trimble TX8 laser scanners to market.