In Norway’s Sogn og Fjordane County, energy companies often use traditional survey methods to adjust the sag of newly constructed power lines. But for a power line in the mountains of Leikanger, the precipitous landscape and long span were too much for traditional techniques. Using advanced total station technology, a Norwegian survey company helped adjust the lines in real time, shortening the project from several days down to one and securing repeat business.



In August 2017, Geomatikk Survey was commissioned to measure and adjust the sag of a new, 450-m-long section of four power lines that their customer, BKK Enotek, had just installed. The survey crew originally planned to use the company’s newly acquired Trimble® SX10 scanning total station to acquire the needed measurements and process the data in the office to calculate how much adjusting the lines needed. But then…


“When we pointed the SX10 at the first power line, the sensor automatically locked on to the line itself, without a prism,” said Even Sellevoll, a survey engineer with Geomatikk Survey. “We didn’t know that it would do that. That discovery meant that we could not only more easily and accurately survey the lines, we could adjust their sag in real time, directly in the field.”



Sellevoll et son collègue Svein Ivar Vestbø ont d'abord utilisé leur récepteur GNSS Trimble R10 et la technologie de leur station totale SX10 pour établir les contrôles du projet. Ensuite, ils se sont placés sous le pylône électrique à une extrémité de la ligne, ils ont dirigé le SX10 directement au-dessus de leurs têtes et ont collecté un point où le câble est relié au pylône. Ce processus a été répété pour chaque ligne. En se plaçant sous l'autre pylône, ils ont relevé quatre points de liaison supplémentaires. À l'aide du contrôleur de l'instrument, ils ont déterminé une corde entre les points d'extrémité de chaque ligne électrique et réalisé un déport vertical depuis cette corde jusqu'à la ligne électrique existante. Étant donné la longueur des câbles et leur hauteur de 25 m au-dessus du sol, BKK a indiqué que le relâchement de chaque câble devait être de 6,26 m au point le plus bas sous la corde.

En mesurant avec une précision de 3 cm, l'équipe de Geomatikk Survey a déterminé que chacune des quatre lignes électriques pendait entre 1.5 m et 2 m sous la limite de relâchement acceptable.

To calibrate the tension, Sellevoll aimed the SX10 at a line. When it locked onto the cable, he telephoned a BKK crew positioned in the valley’s transformer station. He then followed the cable’s movements in real-time, guiding the tensioning crew until the line’s sag was in the correct position. He repeated this process for the other three cables.

Although a scan of the power lines wasn’t required, Sellevoll and Vestbø used the opportunity to test the scanning capabilities of the SX10 and provide detailed 3D-derived documentation to their client.

Setting up near each tower, with the cables about 18 m overhead, they scanned the entire span in two scans, one from the top of the slope and one from the bottom. Collecting 26,600 points per second, each scan took about 10 minutes to complete.


Back in the office, the Geomatikk Survey team needed just one day to use Trimble Business Center software to integrate the point cloud and survey data, and then produce a vectorbased report to verify that the power lines were adjusted to BKK specifications. Based on their success in Leikanger, BKK commissioned Geomatikk Survey to perform sag measurements on a different section of the power line. Not only was the new technology a game changer in the field, it is proving to be a valuable business development tool. 


“The ability to switch between total station surveying and scanning with one instrument allows us to be more efficient, both in time and costs. The SX10 is giving us the ability to take on projects that require real-time surveying and opening up a whole range of business development opportunities.”

Even Sellevoll, Survey Engineer, Geomatikk Survey